What Does Monogram Oven Error Code F10 Mean?

Error code F10 on a Monogram oven indicates runaway oven temperature — the oven temperature has exceeded approximately 590°F (310°C) during a normal bake or broil cycle. This is a critical safety fault: the oven immediately shuts off the heating elements to prevent damage and fire risk.

Common Causes

  • Welded bake/broil relay – The most dangerous cause — a relay on the control board has welded shut and is continuously powering the element with no temperature control.
  • Failed oven temperature sensor (RTD) – The sensor reads too low, causing the control to keep heating past the actual setpoint.
  • Runaway control board – The board has lost control of its relay outputs.

How to Troubleshoot

  1. Disconnect power immediately – Turn off the oven’s circuit breaker. F10 is a safety alert — stop using the oven until it is repaired.
  2. Do not reset and resume – A welded relay will cause the oven to re-overheat immediately. This is a fire hazard.

When to Call a Professional

F10 requires immediate professional inspection. Call 844-752-7887 urgently — do not use the oven until a certified Monogram technician clears this fault.

Need Help? If the error code hasn't resolved after basic troubleshooting, call our certified Monogram technicians at 844-752-7887 for professional diagnosis and same-day repair.